>
Home > Our Products > Bottles

   
Iron pot thermo-melt label machine.
  Item No:BOIP - 300
 Iron pot thermo-melt label machine.[ BOIP-300 ] Iron pot thermo-melt label machine.[ BOIP-300 ]
The feature of this type of machine.
1.Suits mineral water, drink, milk, yogurt, PET, PP, PE round bottle paste attaches the entire surface to use
 OPP, pearl membrane, compound paper and so on becomes the volume label material.
2.Substitute PVC contraction membrane lebel, cost down 30% above.
3.Before or after the backfill, may paste the label.
4.Feeding label uses an astrolabe to separate bottle, high-speed and stable operation.
5.Feeding label uses the servomoter synchronization tracing and cut-off, matching a vacuum drum high speed
 adsorption, ensure pastes the label fine and stable.
6.Drive uses gearing design, when high speed pastes the label, stable fine.
7.When the torsion or enters the bottle exceptionally, the safety guard device may auto-stop the machine.
8.Labeling speed adopted two sections of control, high and low speed is easy to switch over.
9.Two rolls label supply system has the tensity control device, under the operation may changing membrane.
10.Pastes the label position can be adjusted.
Outer Diameter φ40~110mm
Label Size 10~250mm
Speed 250pcs/min.
Back Top  
4 Litre square bottle of thermo-melt label machine.
  Item No:BOSB - 4000
 4 Litre square bottle of thermo-melt label machine.[ BOSB-4000 ]  
The feature of this type of machine.
1.Feeding bottle atificially, paste the label automatically.
2.Full roll of label, enter and punch label automatically, has the electric eye locating point installment.
3.Uses thermo-melt glue and paste to label automatically.
4.Suit for bigger container, for example: 3 liters or 4liters, square or polygon bottle.
Item No. BOSB-4000
Power Electric 1φ 220V
Pneumatic 5kg per sq.cm.
Speed 7pcs per min.
Machine size L×W×H 1700×1200×1800mm
Back Top  
Separate & collection cup machine.
 
  Item No:BOSC - 200
   Separate & collection cup machine.[ BOSC-200 ] Separate & collection cup machine.[ BOSC-200 ]
  The feature of this type of machine.
  1.Plastic cup semblance printing or a set of label, paste the label situation use.
  2.Feed cup into the storage trough artificially, the separate organization can separate automatically.
  3.Plastic cup hit the eyelet in the same time, put in on the conveyor then send out.
  4.Complete after the cup send by conveyor to collection organization will collect into entire fold automatically.
 
Item No. BOSC-200
Power Electric 1φ 220V
Pneumatic 5kg per sq.cm.
Speed 200pcs/min.
Machine size L×W×H

Separation 1,700×800×1,600mm.

Collection 1,100×800×1,200mm.
Back Top  
   ADD: No.1, Ln. 74, Gong 5th Rd., Longtan Dist., Taoyuan City 325, Taiwan (R.O.C.)
   TEL: 886-3-4708380
   FAX: 886-3-4708169
   E-MAIL: chingyi.li8169@msa.hinet.net , ching-yi1999@umail.hinet.net